Digital Ortho photos are created by differentially rectifying scanned aerial photographs to compensate for distortions due to the altitude of the aircraft and the relief of the terrain. An ortho photo can be overlaid and combined with other map elements from a vector map without any apparent distortion. We will do the radiometric adjustment of the images for uniform tonal balancing after generating the orthophoto. Then we mosaic the Images to create a seamless data. The resultant mosaic is then cut into sheet sizes that meet the project specifications.

We offer wide range of LiDAR data processing services. We review the LiDAR data, classify it and add Break lines, spot elevations and other height data to the LiDAR DEM and prepare Bare Earth Models as needed to support intended applications of customers. Application area includes the following:

• Contour Generation	• Ortho Photo Generation
• Hydrologic Modeling	• Oil & Gas exploration
• Change Detection	• Volumetric Calculations
• Rail Road Planning	• Power line mapping
• Coastal Studies, etc

We integrate LiDAR data with variety of satellite imagery and Orthophotos. The deliverables shall be provided in all standard GIS/CAD compatible or customer specific formats including ASCII mass point files, TIN models and contours.

| PHOTOGRAMMETRY | GIS | CADD 2D & 3D | HVAC / PIPING | CAFM |